Device Config - Guard Viewer

Tap Menu > Device Config

Configure IPC and IPC channel, NVR and NVR channel remotely.

Single-channel IPC: Set time, sound volume, alarm sound, video compression, OSD, disarming, smart illumination, WDR, day/night mode, motion detection, human body detection, auto tracking, cross line detection, intrusion detection, enter area, leave area, SD card, device restart.
Multi-channel IPC: Set time, sound volume, disarming, alarm sound, device restart.
IPC channel: Set smart illumination, day/night mode, video compression, OSD, motion detection, human body detection, auto tracking, cross line detection, intrusion detection, enter area, leave area.
NVR: Set time, disarming, overwrite when storage is full, recording schedule, device restart.
NVR channel: Set camera name, sound volume, alarm sound, disarming, smart illumination, motion detection, human body detection, cross line detection, intrusion detection, enter the area, leave the area, and recording schedule.

Turn on or off Overwrite When Storage Full:

On: When storage is used up on the IPC’s SD card or NVR’s HDD, recording continues, and the old video will be overwritten by the new video.
Off: Video recording stops when storage is used up on the SD card or HDD.

Configure a recording schedule so the NVR stores video of cameras according to the schedule.

Select camera(s).
Set recording type. Motion detection video is a video clip recorded around the time when a motion detection alarm occurs. By default, it is 70 seconds long (10s before and 60s after the alarm time).
Set recording time: Choose a day(s) of a week to record the video.
Tap to save the settings.

Tap to restart the IPC/NVR.